Using ownyourbits / nextcloudpi-arm64: latest running nextcloudpi docker speed is very slow, how to optimize

blxw987_bao · April 11, 2023, 9:41am

According to the document installation, all with the default configuration

just · April 11, 2023, 4:07pm

Please also confirm your hardware setup.

CPU type
- arm64 or x86-64
- are you using a Raspberry Pi? If so, it supplies only the bare minimum specs as of Model 4.
How much RAM
- If less than 4gb ram by itself, that is horrible.
How fast is your network speed?
- If only xx mb/s of speed, you are hurting.
- Please do not run your server over wifi. Very very slow.
- Upgrade your network to wired gigabit if you can. Will greatly increase speeds.
- External networking speeds will be hampered by your actual ISP speeds.
What kind of disks?
- Spinning sata is fair
- USB 2.0 external spinning drive garbage
- Micro-SD card garbage
- eMMC is not good
- USB 3.0 external drive is fair for light usage
- nvme Good!
- SSD Good!
How many users?
Are you using one of the office suites?
- Collabora CODE, OnlyOffice, etc?
- If so, less than an additional two cores and additional 4gb ram is horrible.
Are you running other services on the same machine?
- Matrix, Jellyfin, Jitsi, ?
- If yes, you’ll need even more ram, etc.

This will give us technical info and logs needed to help you! Thanks.

blxw987_bao · April 12, 2023, 3:26am

pi4,arm64,RAM 8M ，EMMC 32M
network speed 5.27MB/s
SATA USB3.0
user less than 10
not use office suite

System Info

‣ You should run Lets Encrypt for trusted encrypted access

‣ You should open your ports for Lets Encrypt and external access