Need more detailed instruction

🚧 Installation
#1

I’ve installed Nextcloud on a Pi 4 under Ubuntu 20.04 and it seems to be running. I want to attach and use as my primary storage an NVMe SSD 480 GB. Instructions for connecting it are here Configuration-Reference | NextCloudPi Documentation

But the instruction tells me " Navigate to nc-automount in the TUI or the WebUI." I don’t know how to do that. I’ve searched thru the UI and failed to find nc-automount anywhere, so I can’t even get started with Nextcloud. This has to be a really easy thing to do but I’ve spent hours on it and got nowhere. Somebody please point me in the right direction.

#2

Hi @stuartc

I do not use NextcloudPi myself. But as far as I remember from my tests, the NextcloudPi admin panel is a seperate UI, which should be accessible from a web browser at https://nextcloudpi.local:4443 or https://<IP-Address>:4443. Alternatively, you can connect to your Pi via SSH and start the “TUI” from the command line with the command ncp-config.

Hope that helps…

#3

Thanks a lot, that’s what I needed.

1 Like
#4

https://docs.nextcloudpi.com/en/how-to-install-nextcloudpi/

https://docs.nextcloudpi.com/en/how-to-access-nextcloudpi/