Ncpi as dockerfile on Ubuntuserver

[alwi]

Nexcloudpi runs on X64 as Dockerfile (Ubuntuserver). I want to move the data to sda1. sda1 is not yet registered. How should the entry in the fstab read? otherwise the sda ​​cannot be found in the panel.

[OliverV]

@alwi

entry in the fstab

Can follow this guide;

Mounting an external drive using UUID and fstab | Linux admin junior

Create a mountpoint for the external drive for ncdata sudo mkdir /media/ncp Find UUID of external drive ls -lh /dev/disk/by-uuid/ (Mine looks like this) total 0 lrwxrwxrwx 1 root root 15 Aug 11 09:10 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc -> …/…/mmcblk0p2 lrwxrwxrwx 1 root root 10 Aug 11 09:10 35e98a80-8895-41f4-93e7-39940a1fda70 -> …/…/sda1 lrwxrwxrwx 1 root root 15 Aug 11 09:10 9304-D9FD -> …/…/mmcblk0p1 To add a ligne to /etc/fstab sudo nano /etc/fstab add line for your drive (cop…

[alwi]

@OliverV
Thanks for your fast answer. My actuell problem: I cannot open the ncp-panel this moment.
I’ll try seeking later. For now I start to Bach: Weihnachtsoratorium 1-3. My wife and me are singing in the Choir.

[OliverV]

@alwi

I cannot open the ncp-panel

The NCP-panel has no option to use UUID and fstab, you have to use the terminal/ssh to use this method.