Hi,
I’m trying to update my ncp from 1.53.1 to 1.55.3 and i’m getting this error
Downloading updates
Performing updates
Installing template ‘apache2/ncp.conf.sh’…
ERROR: Site nextcloud does not exist!
Error while applying update 1.53.1. Exiting…
How can I solve this ?
Cautious and step by step I assume. 
On cli
sudo raspinfo
gives hints on your software revisions.
ncp
To get a clou what are the main changes.
NC - Maintenance and Release Schedule
NC - Releases and PHP versions
cat /etc/os-release
Be aware a distro-upgrade should lay on your way.
Get accustomned to the update process of the component on the cli/webui and start with backups.
We are holding hands.
The raspinfo
System Information
------------------
Raspberry Pi 4 Model B Rev 1.1
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
Raspberry Pi reference 2020-08-20
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 7252c154838ec5b4576f29c996ac8fe3750cae12, stage2
Linux nextcloudpi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux
Revision : c03111
Serial : 10000000d9b391d1
Model : Raspberry Pi 4 Model B Rev 1.1
Throttled flag : throttled=0x80000
Camera : supported=0 detected=0, libcamera interfaces=0
Videocore information
---------------------
Mar 24 2022 13:19:26
Copyright (c) 2012 Broadcom
version e5a963efa66a1974127860b42e913d2374139ff5 (clean) (release) (start)
alloc failures: 0
compactions: 0
legacy block fails: 0
Filesystem information
----------------------
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 30386396 7658576 21459380 27% /
devtmpfs 1777052 0 1777052 0% /dev
tmpfs 1942780 0 1942780 0% /dev/shm
tmpfs 777112 796 776316 1% /run
tmpfs 5120 4 5116 1% /run/lock
/dev/mmcblk0p1 258095 30829 227267 12% /boot
/dev/sda1 3907016704 3318205828 587766108 85% /media/myCloudDrive
tmpfs 388556 0 388556 0% /run/user/1000
Filename Type Size Used Priority
/var/swap file 102396 29184 -2
Package version information
---------------------------
raspberrypi-ui-mods:
Installed: (none)
raspberrypi-sys-mods:
Installed: 20220224
openbox:
Installed: (none)
lxpanel:
Installed: (none)
pcmanfm:
Installed: (none)
rpd-plym-splash:
Installed: (none)
Networking Information
----------------------
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 795890 bytes 115488510 (110.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 761315 bytes 146772333 (139.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 11429 bytes 3885898 (3.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11429 bytes 3885898 (3.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
USB Information
---------------
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
config.txt
----------
arm_64bit=1
arm_freq=2000
audio_pwm_mode=514
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=3
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=1024
mask_gpu_interrupt1=0x10000
max_framebuffers=2
over_voltage=6
over_voltage_avs=-42500
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=
cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:65:A5:A4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f6721a31-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
raspi-gpio settings
-------------------
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
vcdbg log messages
------------------
sudo: vcdbg: command not found
dmesg log
---------
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.15.32-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022
[ 0.000000] random: fast init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s77144 r8192 d29352 u114688
[ 0.000000] pcpu-alloc: s77144 r8192 d29352 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f6721a31-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 3554104K/4050944K available (11456K kernel code, 1962K rwdata, 4144K rodata, 3776K init, 964K bss, 169160K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37889 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x510/0x6f8 with crng_init=1
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000252] Console: colour dummy device 80x25
[ 0.000800] printk: console [tty1] enabled
[ 0.000870] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000912] pid_max: default: 32768 minimum: 301
[ 0.001048] LSM: Security Framework initializing
[ 0.001254] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001337] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002602] cgroup: Disabling memory control group subsystem
[ 0.005103] rcu: Hierarchical SRCU implementation.
[ 0.006214] EFI services will not be available.
[ 0.006766] smp: Bringing up secondary CPUs ...
[ 0.007819] Detected PIPT I-cache on CPU1
[ 0.007902] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.009072] Detected PIPT I-cache on CPU2
[ 0.009122] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.010243] Detected PIPT I-cache on CPU3
[ 0.010292] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.010441] smp: Brought up 1 node, 4 CPUs
[ 0.010532] SMP: Total of 4 processors activated.
[ 0.010554] CPU features: detected: 32-bit EL0 Support
[ 0.010573] CPU features: detected: 32-bit EL1 Support
[ 0.010595] CPU features: detected: CRC32 instructions
[ 0.041788] CPU: All CPU(s) started at EL2
[ 0.041884] alternatives: patching kernel code
[ 0.043613] devtmpfs: initialized
[ 0.054338] Enabled cp15_barrier support
[ 0.054408] Enabled setend support
[ 0.054619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.054669] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.065339] pinctrl core: initialized pinctrl subsystem
[ 0.066174] DMI not present or invalid.
[ 0.066671] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.070302] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.070619] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.071534] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.071645] audit: initializing netlink subsys (disabled)
[ 0.071951] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1
[ 0.072482] thermal_sys: Registered thermal governor 'step_wise'
[ 0.072722] cpuidle: using governor menu
[ 0.073043] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.073240] ASID allocator initialised with 65536 entries
[ 0.073408] Serial: AMBA PL011 UART driver
[ 0.083238] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.100303] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start
[ 0.104313] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5
[ 0.154771] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.158797] vgaarb: loaded
[ 0.159217] SCSI subsystem initialized
[ 0.159447] usbcore: registered new interface driver usbfs
[ 0.159515] usbcore: registered new interface driver hub
[ 0.159592] usbcore: registered new device driver usb
[ 0.159916] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.160408] pps_core: LinuxPPS API ver. 1 registered
[ 0.160434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.160473] PTP clock support registered
[ 0.162002] clocksource: Switched to clocksource arch_sys_counter
[ 0.250563] VFS: Disk quotas dquot_6.6.0
[ 0.250695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250885] FS-Cache: Loaded
[ 0.251134] CacheFiles: Loaded
[ 0.261844] NET: Registered PF_INET protocol family
[ 0.262463] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.265921] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.266045] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.266321] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.266850] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.267115] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.267212] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.267552] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.268579] RPC: Registered named UNIX socket transport module.
[ 0.268611] RPC: Registered udp transport module.
[ 0.268631] RPC: Registered tcp transport module.
[ 0.268650] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.268681] PCI: CLS 0 bytes, default 64
[ 0.270861] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.271234] kvm [1]: IPA Size Limit: 44 bits
[ 0.272427] kvm [1]: vgic interrupt IRQ9
[ 0.272702] kvm [1]: Hyp mode initialized successfully
[ 1.175580] Initialise system trusted keyrings
[ 1.175993] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.182705] zbud: loaded
[ 1.184534] FS-Cache: Netfs 'nfs' registered for caching
[ 1.185184] NFS: Registering the id_resolver key type
[ 1.185245] Key type id_resolver registered
[ 1.185267] Key type id_legacy registered
[ 1.185381] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.185408] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.186643] Key type asymmetric registered
[ 1.186672] Asymmetric key parser 'x509' registered
[ 1.186762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.187032] io scheduler mq-deadline registered
[ 1.187058] io scheduler kyber registered
[ 1.194867] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.194934] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.195036] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.195131] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[ 1.244104] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.244469] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.244501] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.244530] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.244632] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.244890] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.248981] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.249093] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.249530] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 1.253457] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.253500] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.253554] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.253585] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.261345] iproc-rng200 fe104000.rng: hwrng registered
[ 1.261872] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.263234] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.263674] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.274954] brd: module loaded
[ 1.284515] loop: module loaded
[ 1.285280] Loading iSCSI transport class v2.0-870.
[ 1.290272] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.350160] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.351305] usbcore: registered new interface driver r8152
[ 1.351391] usbcore: registered new interface driver lan78xx
[ 1.351457] usbcore: registered new interface driver smsc95xx
[ 1.353055] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.353106] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.353225] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.353269] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.354088] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890
[ 1.355042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.355080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.355109] usb usb1: Product: xHCI Host Controller
[ 1.355132] usb usb1: Manufacturer: Linux 5.15.32-v8+ xhci-hcd
[ 1.355155] usb usb1: SerialNumber: 0000:01:00.0
[ 1.355875] hub 1-0:1.0: USB hub found
[ 1.355984] hub 1-0:1.0: 1 port detected
[ 1.356624] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.356658] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.356695] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.357172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.357207] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.357234] usb usb2: Product: xHCI Host Controller
[ 1.357256] usb usb2: Manufacturer: Linux 5.15.32-v8+ xhci-hcd
[ 1.357279] usb usb2: SerialNumber: 0000:01:00.0
[ 1.357951] hub 2-0:1.0: USB hub found
[ 1.358080] hub 2-0:1.0: 4 ports detected
[ 1.359657] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.359931] dwc_otg: FIQ enabled
[ 1.359943] dwc_otg: NAK holdoff enabled
[ 1.359953] dwc_otg: FIQ split-transaction FSM enabled
[ 1.359965] Module dwc_common_port init
[ 1.360541] usbcore: registered new interface driver uas
[ 1.360649] usbcore: registered new interface driver usb-storage
[ 1.360887] mousedev: PS/2 mouse device common for all mice
[ 1.366206] sdhci: Secure Digital Host Controller Interface driver
[ 1.366246] sdhci: Copyright(c) Pierre Ossman
[ 1.366787] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.370149] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.370761] hid: raw HID events driver (C) Jiri Kosina
[ 1.370941] usbcore: registered new interface driver usbhid
[ 1.370967] usbhid: USB HID core driver
[ 1.371288] ashmem: initialized
[ 1.379572] Initializing XFRM netlink socket
[ 1.379643] NET: Registered PF_PACKET protocol family
[ 1.379780] Key type dns_resolver registered
[ 1.381334] registered taskstats version 1
[ 1.381383] Loading compiled-in X.509 certificates
[ 1.381977] Key type ._fscrypt registered
[ 1.382053] Key type .fscrypt registered
[ 1.382073] Key type fscrypt-provisioning registered
[ 1.393397] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.393722] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.393886] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 17, base_baud = 0) is a PL011 rev2
[ 1.403050] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.403549] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.404723] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.404757] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.434760] of_cfs_init
[ 1.434921] of_cfs_init: OK
[ 1.470109] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.470475] Waiting for root device PARTUUID=f6721a31-02...
[ 1.542104] mmc1: new high speed SDIO card at address 0001
[ 1.574171] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.575236] mmcblk0: mmc0:aaaa SR32G 29.7 GiB
[ 1.578618] mmcblk0: p1 p2
[ 1.579180] mmcblk0: mmc0:aaaa SR32G 29.7 GiB
[ 1.594321] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 1.594455] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.602764] devtmpfs: mounted
[ 1.610086] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.611154] Freeing unused kernel memory: 3776K
[ 1.611363] Run /sbin/init as init process
[ 1.611386] with arguments:
[ 1.611395] /sbin/init
[ 1.611404] with environment:
[ 1.611413] HOME=/
[ 1.611422] TERM=linux
[ 1.760828] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.760892] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.760920] usb 1-1: Product: USB2.0 Hub
[ 1.763078] hub 1-1:1.0: USB hub found
[ 1.763363] hub 1-1:1.0: 4 ports detected
[ 2.104705] systemd[1]: System time before build time, advancing clock.
[ 2.205219] NET: Registered PF_INET6 protocol family
[ 2.207146] Segment Routing with IPv6
[ 2.207209] In-situ OAM (IOAM) with IPv6
[ 2.259924] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.260944] systemd[1]: Detected architecture arm64.
[ 2.280924] systemd[1]: Set hostname to <nextcloudpi>.
[ 3.530578] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.532195] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.534574] systemd[1]: Created slice system-getty.slice.
[ 3.535346] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.536437] systemd[1]: Created slice system-modprobe.slice.
[ 3.536861] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.537814] systemd[1]: Created slice system-postfix.slice.
[ 3.539247] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.540461] systemd[1]: Created slice User and Session Slice.
[ 3.541307] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.542197] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.543729] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.544320] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.544924] systemd[1]: Reached target Slices.
[ 3.545365] systemd[1]: Reached target Swap.
[ 3.546668] systemd[1]: Listening on Syslog Socket.
[ 3.547657] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.548351] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.549762] systemd[1]: Listening on Journal Audit Socket.
[ 3.550820] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.552045] systemd[1]: Listening on Journal Socket.
[ 3.553284] systemd[1]: Listening on udev Control Socket.
[ 3.554426] systemd[1]: Listening on udev Kernel Socket.
[ 3.555600] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 3.559569] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.564895] systemd[1]: Mounting RPC Pipe File System...
[ 3.570737] systemd[1]: Mounting Kernel Debug File System...
[ 3.576338] systemd[1]: Mounting Kernel Trace File System...
[ 3.577353] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.583932] systemd[1]: Starting Restore / save the current clock...
[ 3.590324] systemd[1]: Starting Set the console keyboard layout...
[ 3.596739] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.603556] systemd[1]: Starting Load Kernel Module configfs...
[ 3.609646] systemd[1]: Starting Load Kernel Module drm...
[ 3.616606] systemd[1]: Starting Load Kernel Module fuse...
[ 3.621334] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.626959] systemd[1]: Starting File System Check on Root Device...
[ 3.636587] systemd[1]: Starting Journal Service...
[ 3.648241] systemd[1]: Starting Load Kernel Modules...
[ 3.654906] systemd[1]: Starting Coldplug All udev Devices...
[ 3.673342] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.675168] systemd[1]: Mounted RPC Pipe File System.
[ 3.675880] fuse: init (API version 7.34)
[ 3.676898] systemd[1]: Mounted Kernel Debug File System.
[ 3.683276] systemd[1]: Mounted Kernel Trace File System.
[ 3.686754] systemd[1]: Finished Restore / save the current clock.
[ 3.691541] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.695722] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.697359] systemd[1]: Finished Load Kernel Module configfs.
[ 3.701022] systemd[1]:pi@nextcloudpi:~ $ modprobe@fuse.service: Succeeded.
[ 3.703200] systemd[1]: Finished Load Kernel Module fuse.
[ 3.710725] systemd[1]: Mounting FUSE Control File System...
[ 3.716903] systemd[1]: Mounting Kernel Configuration File System...
[ 3.721817] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.723808] systemd[1]: Finished Load Kernel Module drm.
[ 3.734949] systemd[1]: Finished Load Kernel Modules.
[ 3.736651] systemd[1]: Mounted FUSE Control File System.
[ 3.742720] systemd[1]: Mounted Kernel Configuration File System.
[ 3.748591] systemd[1]: Started File System Check Daemon to report status.
[ 3.758977] systemd[1]: Starting Apply Kernel Variables...
[ 3.847317] systemd[1]: Finished Apply Kernel Variables.
[ 3.887751] systemd[1]: Finished File System Check on Root Device.
[ 3.896128] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.981444] systemd[1]: Started Journal Service.
[ 4.048560] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 4.127455] systemd-journald[139]: Received client request to flush runtime journal.
[ 4.146477] systemd-journald[139]: File /var/log/journal/f66b20158b564238a718639e1ded6508/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.060654] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 5.061301] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 5.062313] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 5.062807] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 5.134769] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.136431] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.136466] [vc_sm_connected_init]: start
[ 5.137455] [vc_sm_connected_init]: installed successfully
[ 5.155098] mc: Linux media interface: v0.10
[ 5.157055] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.181511] videodev: Linux video capture interface: v2.00
[ 5.182435] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 5.248493] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.275487] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.297521] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.325103] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.342411] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.363722] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.363918] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.365006] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 5.365819] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 5.371343] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 5.372505] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.372548] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.372570] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.372601] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.372619] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.394512] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.394569] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.401711] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 5.423075] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.423143] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.424690] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 5.436301] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 5.455872] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[ 5.455921] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 5.456639] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 5.458383] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 5.458430] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.458453] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.458471] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.458489] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.458879] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.477191] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 5.477249] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 5.533742] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 5.533800] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 5.552980] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.627504] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.651527] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 5.846199] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
[ 5.964839] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.975123] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.976989] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[ 5.978769] usbcore: registered new interface driver brcmfmac
[ 6.042511] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 6.070198] usb 2-1: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 2.61
[ 6.070241] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.070258] usb 2-1: Product: VLI Product String
[ 6.070272] usb 2-1: Manufacturer: VLI Manufacture String
[ 6.070285] usb 2-1: SerialNumber: 000000074570
[ 6.070988] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 6.244943] random: crng init done
[ 6.244969] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.270567] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.270771] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.297111] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 6.399138] scsi host0: uas
[ 6.552216] scsi 0:0:0:0: Direct-Access SABRENT 2210 PQ: 0 ANSI: 6
[ 6.563412] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 6.563464] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.563712] sd 0:0:0:0: [sda] Write Protect is off
[ 6.563733] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
[ 6.564175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.565134] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 6.978669] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.653903] uart-pl011 fe201000.serial: no DMA platform data
[ 13.238767] sda: sda1
[ 13.246266] sd 0:0:0:0: [sda] Attached SCSI disk
[ 13.264659] 8021q: 802.1Q VLAN Support v1.8
[ 13.484532] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 13.485230] bcmgenet fd580000.ethernet eth0: Link is Down
[ 14.029993] raid6: neonx8 gen() 4939 MB/s
[ 14.097988] raid6: neonx8 xor() 3558 MB/s
[ 14.165989] raid6: neonx4 gen() 5062 MB/s
[ 14.233999] raid6: neonx4 xor() 3712 MB/s
[ 14.301996] raid6: neonx2 gen() 4556 MB/s
[ 14.369997] raid6: neonx2 xor() 3368 MB/s
[ 14.437999] raid6: neonx1 gen() 3528 MB/s
[ 14.505994] raid6: neonx1 xor() 2725 MB/s
[ 14.573997] raid6: int64x8 gen() 3418 MB/s
[ 14.641994] raid6: int64x8 xor() 1960 MB/s
[ 14.710045] raid6: int64x4 gen() 3342 MB/s
[ 14.777996] raid6: int64x4 xor() 1976 MB/s
[ 14.846032] raid6: int64x2 gen() 3101 MB/s
[ 14.913990] raid6: int64x2 xor() 1749 MB/s
[ 14.981998] raid6: int64x1 gen() 2407 MB/s
[ 15.050001] raid6: int64x1 xor() 1305 MB/s
[ 15.050016] raid6: using algorithm neonx4 gen() 5062 MB/s
[ 15.050019] raid6: .... xor() 3712 MB/s, rmw enabled
[ 15.050024] raid6: using neon recovery algorithm
[ 15.061063] xor: measuring software checksum speed
[ 15.062285] 8regs : 8478 MB/sec
[ 15.063304] 32regs : 9764 MB/sec
[ 15.065779] arm64_neon : 3984 MB/sec
[ 15.065784] xor: using function: 32regs (9764 MB/sec)
[ 15.154498] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 15.173332] BTRFS: device label myCloudDrive devid 1 transid 46313 /dev/sda1 scanned by systemd-udevd (184)
[ 15.353961] BTRFS info (device sda1): flagging fs with big metadata feature
[ 15.354011] BTRFS info (device sda1): disk space caching is enabled
[ 15.354016] BTRFS info (device sda1): has skinny extents
[ 16.913545] Bluetooth: Core ver 2.22
[ 16.914072] NET: Registered PF_BLUETOOTH protocol family
[ 16.914086] Bluetooth: HCI device and connection manager initialized
[ 16.914102] Bluetooth: HCI socket layer initialized
[ 16.914109] Bluetooth: L2CAP socket layer initialized
[ 16.914127] Bluetooth: SCO socket layer initialized
[ 16.923406] Bluetooth: HCI UART driver ver 2.3
[ 16.923427] Bluetooth: HCI UART protocol H4 registered
[ 16.923875] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 16.924329] Bluetooth: HCI UART protocol Broadcom registered
[ 17.131957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.131977] Bluetooth: BNEP filters: protocol multicast
[ 17.131990] Bluetooth: BNEP socket layer initialized
[ 17.143543] NET: Registered PF_ALG protocol family
[ 17.566170] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.566214] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.192513] IPv4: martian source 255.255.255.255 from 192.168.1.1, on dev eth0
[ 19.192536] ll header: 00000000: ff ff ff ff ff ff d8 07 b6 5e 11 e4 08 00
[ 19.327268] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
[ 31.710063] cam-dummy-reg: disabling
[ 37.933505] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
Unfortunately, I didn’t understand what you were trying to explain with the different links.
It’s an oversight of how components should fit.
I would avoid jumping in one step from ncp 1.53.1 to 1.55.3
sudo ncc status
May be your version is nc 27.x.x end of life,
I would try to upgrade ncp to 1.53.2 then update nc to 28 and so on.
sudo ncc status
- installed: true
- version: 28.0.12.2
- versionstring: 28.0.12
- edition:
- maintenance: false
- needsDbUpgrade: false
- productname: Nextcloud
- extendedSupport: false
Also, I don’t know of any way to choose which version to upgrade to.
Let’s take a look:;
php --version
And you are absolute right, the question is, why do you want to update?
Your cloud is Hub 7, 28.12.2 the latest revision, so it’s fine.
This Hub is going end of life end of this year, so you have to consider to upgrade to the next Hub 8 (29.0.9 the latest now).
php --version
PHP 8.1.18 (cli) (built: May 17 2023 15:59:20) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.1.18, Copyright (c) Zend Technologies
with Zend OPcache v8.1.18, Copyright (c), by Zend Technologies
What did you do to get this error-message?
Until next year you must update your hub.
But first I would do the dist-upgrade debian 11 bullseye to debian 12 bookworm.
ncp-dist-upgrade
What did you do to get this error-message?
sudo ncp-update
Downloading updates
Performing updates
Installing template 'apache2/ncp.conf.sh'...
ERROR: Site nextcloud does not exist!
Error while applying update 1.53.1. Exiting...
Until next year you must update your hub.
I know. That’s why i’m doing the updates…
But first I would do the dist-upgrade debian 11 bullseye to debian 12 bookworm.
There is a known issue on my version of ncp, it says that debian 11 is the latest recommended version. The issue has been fixed in v1.55.0
Oh, are you running this dietpi/proxmox thing? That’s to much for me, but then I recommend the discussion
Hi all,
I am having the same issue.
All started that the nextcloud wasn´t working. Then I did some updates and it was fine. I got a notification that the 1.55.3 is available and I tried to install it but it always failed. Then I recognized that my PHP version is quite old php7.1.x.
Unfortunately I then updated php to 8.3.12. and now of course I get the error when opening the nextcloud dashboard
“This version of Nextcloud is not compatible with PHP>=8.2.
You are currently running 8.3.12.”
I tried now to update the nextcloud during different methods to get to a version where the installed php is supported. But every update attempt failes with the message
“Downloading updates
Performing updates
Installing template ‘apache2/ncp.conf.sh’…
ERROR: Site nextcloud does not exist!
Error while applying update 1.53.1. Exiting…”
Can please somebody help me? I know, I screw up…
PS: I am using nextcloudpi on raspberry 3+
I don’t use proxmox, but the user’s problem on the github issue is not proxmox related.
I propose searching the web for error messages.
Some had the same problem, never heard of again, spooky.
Then let’s take a look:
sudo systemctl status
sudo sytemctl status apache2.service
We try to get better hints for further searches.
sudo systemctl status
● nextcloudpi
State: degraded
Jobs: 0 queued
Failed: 2 units
Since: Thu 1970-01-01 01:00:02 BST; 54 years 10 months ago
CGroup: /
├─user.slice
│ └─user-1000.slice
│ ├─user@1000.service …
│ │ └─init.scope
│ │ ├─269225 /lib/systemd/systemd --user
│ │ └─269226 (sd-pam)
│ └─session-1348.scope
│ ├─269222 sshd: pi [priv]
│ ├─269271 sshd: pi@pts/0
│ ├─269272 -bash
│ ├─269286 sudo systemctl status
│ ├─269287 systemctl status
│ └─269288 less
├─init.scope
│ └─1 /sbin/init
└─system.slice
├─haveged.service
│ └─305 /usr/sbin/haveged --Foreground --verbose=1
├─apache2.service
│ ├─ 624 /usr/sbin/apache2 -k start
│ ├─202771 /usr/sbin/apache2 -k start
│ └─202772 /usr/sbin/apache2 -k start
├─systemd-udevd.service
│ └─170 /lib/systemd/systemd-udevd
├─triggerhappy.service
│ └─380 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd.socket --user nobody --deviceglob /dev/input/event*
├─cron.service
│ └─348 /usr/sbin/cron -f
├─mariadb.service
│ └─2119 /usr/sbin/mariadbd
├─polkit.service
│ └─580 /usr/libexec/polkitd --no-debug
├─bluetooth.service
│ └─1083 /usr/libexec/bluetooth/bluetoothd
├─wpa_supplicant.service
│ └─382 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
├─systemd-journald.service
│ └─139 /lib/systemd/systemd-journald
├─unattended-upgrades.service
│ └─482 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
├─ssh.service
│ └─513 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
├─nc-automount.service
│ └─408 /usr/bin/python3 /usr/bin/udiskie -NTFv
├─notify_push.service
│ └─2205 /var/www/nextcloud/apps/notify_push/bin/aarch64/notify_push --allow-self-signed /var/www/nextcloud/config/config.php
├─hciuart.service
│ └─1070 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow -
├─rsyslog.service
│ └─364 /usr/sbin/rsyslogd -n -iNONE
├─dhcpcd.service
│ ├─ 851 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0
│ └─1173 /usr/sbin/dhcpcd -q -w
├─rng-tools-debian.service
│ └─430 /usr/sbin/rngd -r /dev/hwrng
├─redis-server.service
│ └─2198 /usr/bin/redis-server 127.0.0.1:0
├─system-postfix.slice
│ └─postfix@-.service
│ ├─ 1347 /usr/lib/postfix/sbin/master -w
│ ├─ 1349 qmgr -l -t unix -u
│ └─268492 pickup -l -t unix -u -c
├─smartmontools.service
│ └─369 /usr/sbin/smartd -n
├─php8.1-fpm.service
│ ├─469 php-fpm: master process (/etc/php/8.1/fpm/php-fpm.conf)
│ ├─734 php-fpm: pool www
│ ├─735 php-fpm: pool www
│ ├─736 php-fpm: pool www
│ ├─737 php-fpm: pool www
│ ├─738 php-fpm: pool www
│ ├─739 php-fpm: pool www
│ ├─740 php-fpm: pool www
│ ├─741 php-fpm: pool www
│ ├─742 php-fpm: pool www
│ ├─743 php-fpm: pool www
│ ├─744 php-fpm: pool www
│ ├─745 php-fpm: pool www
│ ├─746 php-fpm: pool www
│ ├─747 php-fpm: pool www
│ ├─748 php-fpm: pool www
│ ├─749 php-fpm: pool www
│ ├─750 php-fpm: pool www
│ ├─751 php-fpm: pool www
│ ├─752 php-fpm: pool www
│ ├─753 php-fpm: pool www
│ ├─754 php-fpm: pool www
│ ├─755 php-fpm: pool www
│ ├─756 php-fpm: pool www
│ ├─757 php-fpm: pool www
│ ├─758 php-fpm: pool www
│ ├─759 php-fpm: pool www
│ ├─760 php-fpm: pool www
│ ├─761 php-fpm: pool www
│ ├─762 php-fpm: pool www
│ ├─763 php-fpm: pool www
│ ├─764 php-fpm: pool www
│ ├─765 php-fpm: pool www
│ ├─766 php-fpm: pool www
│ ├─767 php-fpm: pool www
│ ├─768 php-fpm: pool www
│ ├─769 php-fpm: pool www
│ └─770 php-fpm: pool www
├─udisks2.service
│ └─381 /usr/libexec/udisks2/udisksd
├─nc-automount-links.service
│ ├─352 /bin/bash /usr/local/etc/nc-automount-links-mon
│ ├─388 inotifywait --monitor --event create --event delete --format %f %e /media/
│ ├─389 grep --line-buffered ISDIR
│ └─390 /bin/bash /usr/local/etc/nc-automount-links-mon
├─dbus.service
│ └─349 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
├─systemd-timesyncd.service
│ └─261758 /lib/systemd/systemd-timesyncd
├─system-getty.slice
│ └─getty@tty1.service
│ └─1180 /sbin/agetty -o -p -- \u --noclear tty1 linux
├─avahi-daemon.service
│ ├─347 avahi-daemon: running [nextcloudpi.local]
│ └─370 avahi-daemon: chroot helper
└─systemd-logind.service
└─379 /lib/systemd/systemd-logind
sudo sytemctl status apache2.service
● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2024-11-10 12:20:20 GMT; 3 days ago
Docs: https://httpd.apache.org/docs/2.4/
Process: 466 ExecStart=/usr/sbin/apachectl start (code=exited, status=0/SUCCESS)
Process: 202764 ExecReload=/usr/sbin/apachectl graceful (code=exited, status=0/SUCCESS)
Main PID: 624 (apache2)
Tasks: 105 (limit: 4164)
CPU: 4min 39.338s
CGroup: /system.slice/apache2.service
├─ 624 /usr/sbin/apache2 -k start
├─202771 /usr/sbin/apache2 -k start
└─202772 /usr/sbin/apache2 -k start
Nov 10 12:20:17 nextcloudpi systemd[1]: Starting The Apache HTTP Server...
Nov 10 12:20:20 nextcloudpi systemd[1]: Started The Apache HTTP Server.
Nov 11 00:00:03 nextcloudpi systemd[1]: Reloading The Apache HTTP Server.
Nov 11 00:00:04 nextcloudpi systemd[1]: Reloaded The Apache HTTP Server.
Nov 12 00:00:02 nextcloudpi systemd[1]: Reloading The Apache HTTP Server.
Nov 12 00:00:02 nextcloudpi systemd[1]: Reloaded The Apache HTTP Server.
Nov 13 00:00:01 nextcloudpi systemd[1]: Reloading The Apache HTTP Server.
Nov 13 00:00:01 nextcloudpi systemd[1]: Reloaded The Apache HTTP Server.
sudo systemctl status --failed
The only hint I see.
Did you get “ncp-dist-upgrade” offered on login screen?
Did you get “ncp-dist-upgrade” offered on login screen?
No, didn’t.
sudo systemctl status --failed
● nextcloudpi
State: degraded
Jobs: 0 queued
Failed: 2 units
Since: Thu 1970-01-01 01:00:02 BST; 54 years 10 months ago
CGroup: /
├─user.slice
│ └─user-1000.slice
│ ├─user@1000.service …
│ │ └─init.scope
│ │ ├─357253 /lib/systemd/systemd --user
│ │ └─357254 (sd-pam)
│ └─session-1830.scope
│ ├─357249 sshd: pi [priv]
│ ├─357302 sshd: pi@pts/0
│ ├─357303 -bash
│ ├─357317 sudo systemctl status --failed
│ ├─357318 systemctl status --failed
│ └─357319 less
├─init.scope
│ └─1 /sbin/init
└─system.slice
├─haveged.service
│ └─305 /usr/sbin/haveged --Foreground --verbose=1
├─apache2.service
│ ├─ 624 /usr/sbin/apache2 -k start
│ ├─280089 /usr/sbin/apache2 -k start
│ └─280090 /usr/sbin/apache2 -k start
├─systemd-udevd.service
│ └─170 /lib/systemd/systemd-udevd
├─triggerhappy.service
│ └─380 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --s>
├─cron.service
│ └─348 /usr/sbin/cron -f
├─mariadb.service
│ └─2119 /usr/sbin/mariadbd
├─polkit.service
│ └─580 /usr/libexec/polkitd --no-debug
├─bluetooth.service
│ └─1083 /usr/libexec/bluetooth/bluetoothd
├─wpa_supplicant.service
│ └─382 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
├─systemd-journald.service
│ └─139 /lib/systemd/systemd-journald
├─unattended-upgrades.service
│ └─482 /usr/bin/python3 /usr/share/unattended-upgrades/unattended>
├─ssh.service
│ └─513 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
├─nc-automount.service
│ └─408 /usr/bin/python3 /usr/bin/udiskie -NTFv
├─notify_push.service
│ └─2205 /var/www/nextcloud/apps/notify_push/bin/aarch64/notify_pu>
├─hciuart.service
│ └─1070 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow -
├─rsyslog.service
│ └─364 /usr/sbin/rsyslogd -n -iNONE
├─dhcpcd.service
│ ├─ 851 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.co>
│ └─1173 /usr/sbin/dhcpcd -q -w
├─rng-tools-debian.service
│ └─430 /usr/sbin/rngd -r /dev/hwrng
├─redis-server.service
│ └─2198 /usr/bin/redis-server 127.0.0.1:0
├─system-postfix.slice
│ └─postfix@-.service
│ ├─ 1347 /usr/lib/postfix/sbin/master -w
│ ├─ 1349 qmgr -l -t unix -u
│ └─357220 pickup -l -t unix -u -c
├─smartmontools.service
│ └─369 /usr/sbin/smartd -n
├─php8.1-fpm.service
│ ├─469 php-fpm: master process (/etc/php/8.1/fpm/php-fpm.conf)
│ ├─734 php-fpm: pool www
│ ├─735 php-fpm: pool www
│ ├─736 php-fpm: pool www
│ ├─737 php-fpm: pool www
│ ├─738 php-fpm: pool www
│ ├─739 php-fpm: pool www
│ ├─740 php-fpm: pool www
│ ├─741 php-fpm: pool www
│ ├─742 php-fpm: pool www
│ ├─743 php-fpm: pool www
│ ├─744 php-fpm: pool www
│ ├─745 php-fpm: pool www
│ ├─746 php-fpm: pool www
│ ├─747 php-fpm: pool www
│ ├─748 php-fpm: pool www
│ ├─749 php-fpm: pool www
│ ├─750 php-fpm: pool www
│ ├─751 php-fpm: pool www
│ ├─752 php-fpm: pool www
│ ├─753 php-fpm: pool www
│ ├─754 php-fpm: pool www
│ ├─755 php-fpm: pool www
│ ├─756 php-fpm: pool www
│ ├─757 php-fpm: pool www
│ ├─758 php-fpm: pool www
│ ├─759 php-fpm: pool www
│ ├─760 php-fpm: pool www
│ ├─761 php-fpm: pool www
│ ├─762 php-fpm: pool www
│ ├─763 php-fpm: pool www
│ ├─764 php-fpm: pool www
│ ├─765 php-fpm: pool www
│ ├─766 php-fpm: pool www
│ ├─767 php-fpm: pool www
│ ├─768 php-fpm: pool www
│ ├─769 php-fpm: pool www
│ └─770 php-fpm: pool www
├─udisks2.service
│ └─381 /usr/libexec/udisks2/udisksd
├─nc-automount-links.service
│ ├─352 /bin/bash /usr/local/etc/nc-automount-links-mon
│ ├─388 inotifywait --monitor --event create --event delete --form>
│ ├─389 grep --line-buffered ISDIR
│ └─390 /bin/bash /usr/local/etc/nc-automount-links-mon
├─dbus.service
│ └─349 /usr/bin/dbus-daemon --system --address=systemd: --nofork >
├─systemd-timesyncd.service
│ └─351975 /lib/systemd/systemd-timesyncd
├─system-getty.slice
│ └─getty@tty1.service
│ └─1180 /sbin/agetty -o -p -- \u --noclear tty1 linux
├─avahi-daemon.service
│ ├─347 avahi-daemon: running [nextcloudpi.local]
│ └─370 avahi-daemon: chroot helper
└─systemd-logind.service
└─379 /lib/systemd/systemd-logind
Do you have it at hand?
pi@nextcloudpi:~ $ ncp-
ncp-backup ncp-dist-upgrade ncp-test-updates
ncp-backup-auto ncp-notify-unattended-upgrade ncp-update
ncp-check-nc-version ncp-notify-update ncp-update-nc
ncp-check-updates ncp-report ncp-zram
ncp-check-version ncp-restore
ncp-config ncp-scan
pi@nextcloudpi:~ $ ncp-
I would expect a listing of the failed services like this.
pi@nextcloudpi:~ $ sudo systemctl status --failed
× bthelper@hci0.service - Raspberry Pi bluetooth helper
Loaded: loaded (/lib/systemd/system/bthelper@.service; static)
Active: failed (Result: exit-code) since Thu 2024-10-31 08:47:17 CET; 2 weeks 0 days ago
Main PID: 588 (code=exited, status=1/FAILURE)
CPU: 14msOkt 31 08:47:16 nextcloudpi systemd[1]: Starting bthelper@hci0.service - Raspberry Pi bluetooth helper…
Okt 31 08:47:17 nextcloudpi bthelper[593]: Can’t init device hci0: Invalid argument (22)
Okt 31 08:47:17 nextcloudpi systemd[1]: bthelper@hci0.service: Main process exited, code=exited, status=1/FAILURE
Okt 31 08:47:17 nextcloudpi systemd[1]: bthelper@hci0.service: Failed with result ‘exit-code’.
Okt 31 08:47:17 nextcloudpi systemd[1]: Failed to start bthelper@hci0.service - Raspberry Pi bluetooth helper.× nvmf-autoconnect.service - Connect NVMe-oF subsystems automatically during boot
Loaded: loaded (/lib/systemd/system/nvmf-autoconnect.service; enabled; preset: enabled)
Active: failed (Result: exit-code) since Thu 2024-10-31 08:47:17 CET; 2 weeks 0 days ago
CPU: 21msOkt 31 08:47:17 nextcloudpi systemd[1]: Starting nvmf-autoconnect.service - Connect NVMe-oF subsystems automatically du>
Okt 31 08:47:17 nextcloudpi modprobe[620]: modprobe: FATAL: Module nvme-fabrics not found in directory /lib/modules/6.1>
Okt 31 08:47:17 nextcloudpi systemd[1]: nvmf-autoconnect.service: Control process exited, code=exited, status=1/FAILURE
Okt 31 08:47:17 nextcloudpi systemd[1]: nvmf-autoconnect.service: Failed with result ‘exit-code’.
Okt 31 08:47:17 nextcloudpi systemd[1]: Failed to start nvmf-autoconnect.service - Connect NVMe-oF subsystems automatic>× openipmi.service - LSB: OpenIPMI Driver init script
Loaded: loaded (/etc/init.d/openipmi; generated)
Active: failed (Result: exit-code) since Thu 2024-10-31 08:47:18 CET; 2 weeks 0 days ago
Docs: man:systemd-sysv-generator(8)
CPU: 140msOkt 31 08:47:17 nextcloudpi systemd[1]: Starting openipmi.service - LSB: OpenIPMI Driver init script…
Okt 31 08:47:18 nextcloudpi openipmi[661]: Starting ipmi drivers ipmi failed!
Okt 31 08:47:18 nextcloudpi openipmi[661]: .
Okt 31 08:47:18 nextcloudpi systemd[1]: openipmi.service: Control process exited, code=exited, status=1/FAILURE
Okt 31 08:47:18 nextcloudpi systemd[1]: openipmi.service: Failed with result ‘exit-code’.
Okt 31 08:47:18 nextcloudpi systemd[1]: Failed to start openipmi.service - LSB: OpenIPMI Driver init script.
pi@nextcloudpi:~ $
Do you have it at hand?
ncp-backup ncp-report
ncp-check-nc-version ncp-restore
ncp-check-updates ncp-scan
ncp-check-version ncp-test-updates
ncp-config ncp-update
ncp-dist-upgrade ncp-update-nc
ncp-notify-unattended-upgrade ncp-zram
ncp-notify-update
I would expect a listing of the failed services like this.
Unfortunately, that’s the only result I can get.
TBH I don’t expect deeper knowledge about the failing services.
The web searches show me some in the same situation but no solution of the underlying problem. As ordinary user of ncp my advice is filing a bug-report on github and planing a workaround, setup a new instance and try to transfer data with backup/restore means provided by ncp.
Does anyone have any other ideas?