# Onlyoffice community on raspberry pi 4

**URL:** <https://help.nextcloud.com/t/onlyoffice-community-on-raspberry-pi-4/71528>\
**Category:** 📄 Office\
**Tags:** onlyoffice\
**Created:** [February 18, 2020, 9:09pm UTC](https://help.nextcloud.com/t/onlyoffice-community-on-raspberry-pi-4/71528 "2020-02-18T21:09:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![mbcon](https://help.nextcloud.com/letter_avatar/mbcon/32/5_5575768a8748004e209b776fc1b2916d.png) [@mbcon](https://help.nextcloud.com/u/mbcon)\
**Post date:** [June 7, 2020, 6:05pm UTC](https://help.nextcloud.com/t/onlyoffice-community-on-raspberry-pi-4/71528/2 "2020-06-07T18:05:41Z")

</div>

Hi Greg15,  
see how far I came with my device [here](https://help.nextcloud.com/t/nc-onlyoffice-on-arm64-using-qemu/83913). Maybe this is a temporary solution for you as well, until ARM devices will be supported out of the box.

Cheers,  
mbcon

---

_[View the full topic](https://help.nextcloud.com/t/onlyoffice-community-on-raspberry-pi-4/71528)._