NCP upgrade to Debian Bullseye thread

â„č Support 📩 Appliances (Docker, Snappy, VM, NCP, AIO)
60

I run the upgrade to “bullseye” on a RPI 4, 8GB without problems. NCP is v1.46.8 , NC 23.0.2
A few weeks ago i upgraded to PHP 8.0 . After the upgrade to “bullseye” PHP still is on v8.0
Maybee this is interessting to some others.

61

here is the output of docker logs nextcloudpi (raspberry pi 4 4 GB ram, raspberry pi os 64bits bullseye, container image v1.47.1, removed all previous containers, empty volume for storage) :

Making /usr/local/etc/ncp-config.d persistent ...
Making /etc/services-enabled.d persistent ...
Making /etc/letsencrypt persistent ...
Making /etc/shadow persistent ...
Making /etc/cron.d persistent ...
Making /etc/cron.daily persistent ...
Making /etc/cron.hourly persistent ...
Making /etc/cron.weekly persistent ...
Making /usr/local/bin persistent ...
Making /etc/apache2 persistent ...
Starting PHP-fpm
Starting Apache
Starting mariaDB
2022-03-07 11:17:54 0 [Note] mysqld (mysqld 10.5.12-MariaDB-0+deb11u1) starting as process 147 ...
2022-03-07 11:17:54 0 [Warning] Can't create test file /data/database/nextcloudpi.lower-test
mysqld: Can't change dir to '/data/database/' (Errcode: 2 "No such file or directory")
2022-03-07 11:17:54 0 [ERROR] Aborting

it looks like a dir/file permission issue but i don’t know what i should do to resolve it. anyone knows ? thanks.

62

A fix has been pushed. See

1 Like
63

Hi,
Any workaround for “Wrong salt length” when trying to activate ssh?

Thank you,
Martin

EDIT: Well, upgrading ncp allowed me to change the password!

1 Like
64

i’plan this Weekend this update at my proxmox lxe container. Was there some Things to prepare? (Snapshot off course i’will do before)

or run only the command ncp-dist-upgrade as root? or better little bit more wait, maybe the devs there still are fixing issues 
 ?

65

A post was split to a new topic: Armbian has Discontinued Support for some older devices

66

I’m running Armbian. Is it recommended to upgrade to bullseye by means of sudo ncp-dist-upgrade, or rather the Armbian-way (which I didn’t sort out yet)?

67

@Uniek Please use ncp-dist-upgrade for upgrading to bullseye

68

error after performing sudo ncp-dist-upgrade
should I do
sudo apt autoremove
Thanks

edit
my ncp is broken nothing works anymore

Maintenance mode enabled
Atteint :1 Index of /debian buster InRelease
RĂ©ception de :2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
15.0 ko réceptionnés en 1s (19.2 ko/s)
Lecture des listes de paquets
 Fait
Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Calcul de la mise à jour
 Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Note : sélection de « php7.3-common » au lieu de « php7.3-fileinfo »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
php-igbinary* php-redis* php-smbclient* php7.3* php7.3-bz2* php7.3-cli* php7.3-curl* php7.3-fpm* php7.3-gd* php7.3-intl* php7.3-json* php7.3-ldap*
php7.3-mbstring* php7.3-opcache* php7.3-xml* php7.3-zip*
0 mis à jour, 0 nouvellement installés, 16 à enlever et 0 non mis à jour.
AprĂšs cette opĂ©ration, 10.9 Mo d’espace disque seront libĂ©rĂ©s.
(Lecture de la base de données
 105762 fichiers et répertoires déjà installés.)
Suppression de php-redis (4.2.0-1) 

Suppression de php-igbinary (3.0.0-1) 

Suppression de php-smbclient (0.9.0-3+b1) 

Suppression de php7.3 (7.3.31-1~deb10u1) 

Suppression de php7.3-bz2 (7.3.31-1~deb10u1) 

Suppression de php7.3-fpm (7.3.31-1~deb10u1) 

Conf php7.3-fpm disabled.
apache2_invoke prerm: Disable configuration php7.3-fpm
Suppression de php7.3-cli (7.3.31-1~deb10u1) 

Suppression de php7.3-curl (7.3.31-1~deb10u1) 

Suppression de php7.3-gd (7.3.31-1~deb10u1) 

Suppression de php7.3-intl (7.3.31-1~deb10u1) 

Suppression de php7.3-json (7.3.31-1~deb10u1) 

Suppression de php7.3-ldap (7.3.31-1~deb10u1) 

Suppression de php7.3-mbstring (7.3.31-1~deb10u1) 

Suppression de php7.3-opcache (7.3.31-1~deb10u1) 

Suppression de php7.3-xml (7.3.31-1~deb10u1) 

Suppression de php7.3-zip (7.3.31-1~deb10u1) 

Traitement des actions diffĂ©rĂ©es (« triggers ») pour man-db (2.8.5-2) 

(Lecture de la base de données
 105602 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de php7.3-mbstring (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-fpm (7.3.31-1~deb10u1) 

apache2_invoke postrm: Purging state for php7.3-fpm
dpkg: avertissement: lors de la suppression de php7.3-fpm, le rĂ©pertoire « /etc/php/7.3/fpm/conf.d » n’était pas vide, donc il n’a pas Ă©tĂ© supprimĂ©
Purge des fichiers de configuration de php7.3-json (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-bz2 (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php-smbclient (0.9.0-3+b1) 

Purge des fichiers de configuration de php7.3-intl (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-xml (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-cli (7.3.31-1~deb10u1) 

dpkg: avertissement: lors de la suppression de php7.3-cli, le rĂ©pertoire « /etc/php/7.3/cli/conf.d » n’était pas vide, donc il n’a pas Ă©tĂ© supprimĂ©
Purge des fichiers de configuration de php7.3-opcache (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php-igbinary (3.0.0-1) 

Purge des fichiers de configuration de php7.3-zip (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-ldap (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php7.3-curl (7.3.31-1~deb10u1) 

Purge des fichiers de configuration de php-redis (4.2.0-1) 

Purge des fichiers de configuration de php7.3-gd (7.3.31-1~deb10u1) 

Traitement des actions diffĂ©rĂ©es (« triggers ») pour systemd (241-7~deb10u8+rpi1) 

Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
php7.3-mysql*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
AprĂšs cette opĂ©ration, 355 ko d’espace disque seront libĂ©rĂ©s.
(Lecture de la base de données
 105588 fichiers et répertoires déjà installés.)
Suppression de php7.3-mysql (7.3.31-1~deb10u1) 

(Lecture de la base de données
 105575 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de php7.3-mysql (7.3.31-1~deb10u1) 

Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Note : sélection de « php-redis » au lieu de « php7.3-redis »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Note : sélection de « php7.3-common » au lieu de « php7.3-exif »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
php-bcmath* php7.3-bcmath*
0 mis à jour, 0 nouvellement installés, 2 à enlever et 0 non mis à jour.
AprĂšs cette opĂ©ration, 68.6 ko d’espace disque seront libĂ©rĂ©s.
(Lecture de la base de données
 105575 fichiers et répertoires déjà installés.)
Suppression de php-bcmath (2:7.3+69) 

Suppression de php7.3-bcmath (7.3.31-1~deb10u1) 

(Lecture de la base de données
 105563 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de php7.3-bcmath (7.3.31-1~deb10u1) 

Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
php7.3-gmp*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
AprĂšs cette opĂ©ration, 85.0 ko d’espace disque seront libĂ©rĂ©s.
(Lecture de la base de données
 105563 fichiers et répertoires déjà installés.)
Suppression de php7.3-gmp (7.3.31-1~deb10u1) 

(Lecture de la base de données
 105554 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de php7.3-gmp (7.3.31-1~deb10u1) 

Lecture des listes de paquets
 Fait
Construction de l’arbre des dĂ©pendances
Lecture des informations d’état
 Fait
Note : sélection de « php-imagick » au lieu de « php7.3-imagick »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libzip4 php7.3-readline
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
sed: impossible de lire /etc/systemd/system/dhcpcd.service.d/wait.conf: Aucun fichier ou dossier de ce type
Something went wrong. Fix it and try again

69

do i need to do an ncp restoration?
or
restore the sd card?

please

70

@Jeano Looks like you’re missing the dhcpcd service for some reason. What’s the output of systemctl status dhcpcd?

71

Good evening theCalcaholic
Thank you for your help.
Now I have restored my sd card
How can I see where systemctl status dhcpcd is please

72

Now my nextcloud is too, slow
just to load the page System Info it took 6m and the port check 80 is closed
In the System Info

‣ You should open your ports for Lets Encrypt and external access

NextCloudPi version v1.47.1
OS Raspbian GNU/Linux 10. 5.10.103-v7l+ (armv7l)
automount yes
USB devices sda sdb
datadir /media/myCloudDrive/ncdata
data in SD no
data filesystem btrfs
data disk usage 446G/1.9T
rootfs usage 5.5G/15G
swapfile /var/swap
dbdir /var/lib/mysql
Nextcloud check ok
Nextcloud version 21.0.4.1
HTTPD service up
PHP service up
MariaDB service up
Redis service up
HPB service up
Postfix service up
internet check ok
port check 80 closed
port check 443 open
IP 192.168.1.123
gateway 192.168.1.1
interface eth0
certificates data.********.com
NAT loopback no
uptime 6min
73

Just made an successful ncp-dist-upgrade to Bullseye on NCP v1.47.2 on Rock64 board. Thanks to all the developers. :slight_smile:
Then I upgraded kernel from legacy(4.4) to current (5.15.35-rockchip64) and that broke booting from USB3-SSD :frowning:

Error

Begin: Running /scripts/local-block 
 done.
Begin: Running /scripts/local-block 
 done.
Gave up waiting for root file system device 

ALERT uuid=
 does not exist. Dropping to a shell!

Booting from USB2-attached SSD still works. Plugging device in USB3 after boot also works
 Looks like a bug in armbian/kernel/bootloader(?) described here
Be prepared, Rock64 owners.

74

Hi everyone! little premise, I am really a beginner, but until now for a couple of years I could use Nextcloud on a RaspberryPi 4 with lot of fun :slight_smile:

I tried the update as suggested, with ncp-dist-upgrade to Bullseye, and during the installation process I had the following error:

Calculating upgrade
 Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
Something went wrong. Fix it and try again

I tried rolling back to Buster and I could run the upgrade succesfully after:

  • apt-get update
  • apt install gcc-8-base (probably useless but I did it
)
  • apt-get remove libc6-dev
  • apt-get remove libgcc-8-dev
  • apt autoremove
    an at the end
  • ncp-dist-upgrade

Maybe this helps somebody else :slight_smile:

thanks to the developers for the incredible work!

1 Like
75

I just tried to run the ncp-dist-upgrade job. and got the following error:

sed: can’t read /etc/systemd/system/dhcpcd.service.d/wait.conf: No such file or directory
Something went wrong. Fix it and try again

I found out the directory dhcpcd.service.d was missing. i only have a file dhcpcd5.service in the system directory.

I am not really a developer 
 more an user :). You have a clue how i can solve this? Many thanks in advance

Below the ncp-report output. Report is too big to add in total. I try to cut it in a decent way.

<–! Paste this in GitHub report →

NextCloudPi diagnostics 

sudo: php: command not found
NextCloudPi version  v1.47.2
NextCloudPi image    NextCloudPi_02-06-18
OS                   Raspbian GNU/Linux 10. 5.10.103-v7+ (armv7l)
automount            yes
USB devices          sda 
datadir              /media/USBdrive/ncdata
data in SD           no
data filesystem      ext2/ext3
data disk usage      245G/2.7T
rootfs usage         3.2G/15G
swapfile             /media/c9af4f9f-f6c6-4304-b1b9-38c32ac2569a/swap
dbdir                /media/USBdrive/ncdatabase
Nextcloud check      error
HTTPD service        up
PHP service          down
MariaDB service      up
Redis service        up
HPB service          down
Postfix service      up
internet check       ok
port check 80        closed
port check 443       closed
IP                   ***REMOVED SENSITIVE VALUE***
gateway              ***REMOVED SENSITIVE VALUE***
interface            enxb827eb818da6
certificates         ***REMOVED SENSITIVE VALUE***
NAT loopback         no
uptime               117days
Nextcloud configuration 

sudo: php: command not found
HTTPd logs 

[Thu Jul 07 13:11:01.233734 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to / failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:01.383267 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to / failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:01.383753 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /index.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:01.469134 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /index.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:05.420397 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /css/ncp.css failed, reason: unable to get the remote host name, referer: https://192.168.2.15:4443/?app=nc-previews-auto
[Thu Jul 07 13:11:07.183711 2022] [authz_host:error] [pid 12507:tid 1749468160] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-launcher.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:07.514724 2022] [authz_host:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-output.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:07.599604 2022] [authz_host:error] [pid 12507:tid 1858573312] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /img/favicon.png failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:18.052571 2022] [authz_host:error] [pid 12507:tid 1774646272] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-launcher.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:19.687274 2022] [authz_host:error] [pid 12507:tid 1749468160] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-launcher.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:21.430283 2022] [authz_host:error] [pid 12507:tid 1749468160] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-launcher.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:11:21.430311 2022] [authz_host:error] [pid 12507:tid 1774646272] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /img/green-circle.svg failed, reason: unable to get the remote host name, referer: https://192.168.2.15:4443/css/ncp.css
[Thu Jul 07 13:11:21.502004 2022] [authz_host:error] [pid 12507:tid 1749468160] [client 192.168.2.55:52522] AH01753: access check of 'localhost' to /ncp-launcher.php failed, reason: unable to get the remote host name
[Thu Jul 07 13:26:38.204978 2022] [proxy_fcgi:error] [pid 12507:tid 1766253568] [client 192.168.2.55:52522] AH01067: Failed to read FastCGI header
[Thu Jul 07 13:26:38.208786 2022] [proxy_fcgi:error] [pid 12507:tid 1766253568] (104)Connection reset by peer: [client 192.168.2.55:52522] AH01075: Error dispatching request to :4443: 
[Thu Jul 07 13:26:40.269050 2022] [mpm_event:notice] [pid 875:tid 1996238272] AH00493: SIGUSR1 received.  Doing graceful restart
[Thu Jul 07 13:26:40.401350 2022] [ssl:warn] [pid 875:tid 1996238272] AH01909: localhost:4443:0 server certificate does NOT include an ID which matches the server name
[Thu Jul 07 13:26:40.407900 2022] [mpm_event:notice] [pid 875:tid 1996238272] AH00489: Apache/2.4.38 (Raspbian) OpenSSL/1.1.1d configured -- resuming normal operations
[Thu Jul 07 13:26:40.407957 2022] [core:notice] [pid 875:tid 1996238272] AH00094: Command line: '/usr/sbin/apache2'
[Thu Jul 07 13:26:41.315982 2022] [authz_host:error] [pid 24006:tid 1682277376] [client 192.168.2.55:54908] AH01753: access check of 'localhost' to /ncp-output.php failed, reason: unable to get the remote host name
Database logs
76

I saw something similar above. My output for systemctl status dhcpcd

\u25cf dhcpcd.service - dhcpcd on all interfaces
Loaded: loaded (/lib/systemd/system/dhcpcd.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2022-03-12 04:00:20 CET; 3 months 26 days ago
Main PID: 416 (dhcpcd)
Tasks: 2 (limit: 2178)
CGroup: /system.slice/dhcpcd.service
\u251c\u2500416 /sbin/dhcpcd -q -b
\u2514\u2500583 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -Dnl80211,wext

77

I found how to create the wait.conf file 
 via sudo raspi-conf, select wait for network connection and reboot. But now i cant restart ncp-dist-upgrade. Anyone knows what to do now? Thanks.

80

What does it say when you try to do sudo ncp-dist-upgrade?

Also does your /etc/systemd/system/dhcpd.service.d/wait.conf look like the one below? Referencing to my earlier post in the thread :slight_smile: