# NCP 1.50.3: Adding a GUI possible to the raspi OS after initial installation?

**URL:** <https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136>\
**Category:** 📦 Appliances (Docker, Snappy, VM, NCP, AIO)\
**Tags:** ncp\
**Created:** [October 23, 2022, 8:16am UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136 "2022-10-23T08:16:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![schoetju](https://help.nextcloud.com/user_avatar/help.nextcloud.com/schoetju/32/44547_2.png) [@schoetju](https://help.nextcloud.com/u/schoetju)\
**Post date:** [October 27, 2022, 8:20pm UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136/2 "2022-10-27T20:20:11Z")

</div>

Simply use the WebUI of NextcloudPi

> [@How to configure NextCloudPi](https://help.nextcloud.com/t/how-to-configure-nextcloudpi/126310):
>
> Configuration directly after Activation Directly after the initial setup including Activation of Nextcloud / NextcloudPi there is only the WebUI available for configuration. WebUI If you want to configure NextcloudPi with the WebUI: Open a web browser. Write in the URL [https://nextcloudpi.local:4443](https://nextcloudpi.local:4443) or the IP-address of the Raspberry Pi device in your browser plus adding port :4443 There should be an message saying that the address you are visiting…

---

_[View the full topic](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136)._