# NCP 1.50.3: Adding a GUI possible to the raspi OS after initial installation?

**URL:** <https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136>\
**Category:** 📦 Appliances (Docker, Snappy, VM, NCP, AIO)\
**Tags:** ncp\
**Created:** [October 23, 2022, 8:16am UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136 "2022-10-23T08:16:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gorf](https://help.nextcloud.com/user_avatar/help.nextcloud.com/gorf/32/53351_2.png) [@Gorf](https://help.nextcloud.com/u/Gorf)\
**Post date:** [October 23, 2022, 8:16am UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136/1 "2022-10-23T08:16:25Z")

</div>

I wonder if there is a way to later add a GUI to the Raspian OS on a NCP installation.  
I do know that this probably is nothing advanced users would want, but being a noob I would feel a little better if I had the option to use an UI in some cases. Command line is not really where I am at home.

Has anyone ever done that without any issue? If yes, how?

---

<div class="post-metadata">

**Author:** ![schoetju](https://help.nextcloud.com/user_avatar/help.nextcloud.com/schoetju/32/44547_2.png) [@schoetju](https://help.nextcloud.com/u/schoetju)\
**Post date:** [October 27, 2022, 8:20pm UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136/2 "2022-10-27T20:20:11Z")

</div>

Simply use the WebUI of NextcloudPi

> [@How to configure NextCloudPi](https://help.nextcloud.com/t/how-to-configure-nextcloudpi/126310):
>
> Configuration directly after Activation Directly after the initial setup including Activation of Nextcloud / NextcloudPi there is only the WebUI available for configuration. WebUI If you want to configure NextcloudPi with the WebUI: Open a web browser. Write in the URL [https://nextcloudpi.local:4443](https://nextcloudpi.local:4443) or the IP-address of the Raspberry Pi device in your browser plus adding port :4443 There should be an message saying that the address you are visiting…

---

<div class="post-metadata">

**Author:** ![wwe](https://help.nextcloud.com/user_avatar/help.nextcloud.com/wwe/32/72963_2.png) [@wwe](https://help.nextcloud.com/u/wwe)\
**Post date:** [December 14, 2024, 11:25am UTC](https://help.nextcloud.com/t/ncp-1-50-3-adding-a-gui-possible-to-the-raspi-os-after-initial-installation/148136/3 "2024-12-14T11:25:50Z")

</div>